Scanning From A Windows Application - Canon MultiPASS L6000 User Manual

Scanning From a Windows Application

You can use the MultiPASS to scan documents directly into a Windows
application that supports a TWAIN interface (such as Adobe
PageMaker
do not. If you are unsure whether your Windows application supports this
feature, refer to your user documentation for the application.
The following instructions summarize the procedures for scanning an
image. For specific information about scanning with your Windows
application, refer to the user documentation for the application.
1
Feed the
document.
2
In your Windows
application, specify
the MultiPASS as
the scan device.
3
In the ScanGear
window, specify
the scan options,
and then click
Preview or Scan.
The scanned image appears in your application.
Copying and Scanning With the MultiPASS L6000
6-10
®
). Some applications allow multiple page scans, while others
Place the document facedown in the ADF.
Normally, you select Acquire and then Select Source from
the File menu. Now you select the MultiPASS.
Then you select Acquire and then Image.
For information on the scan options, see page 6-5.
®
Chapter 6