Redialing - Canon MultiPASS L6000 User Manual

Redialing

Manual
To start dialing again, just press the
MultiPASS redials the previous number you dialed with the numeric
buttons. Make sure the document is in the ADF.
Automatic
The MultiPASS automatically redials if the first attempt at sending fails
(for example, if the line is busy). The unit redials twice, and the time
between redials is two minutes. (These are the default settings.) The LCD
displays
redialing.
If the MultiPASS fails to make a connection after the last redial, it beeps.
The LCD displays
You can change the number of redials and the time between redials. The
redialing options are set in the Send Fax dialog box of the MultiPASS
Desktop Manager; see page 8-4.
Chapter 4
If there is no group registered under the one-touch speed
dialing button or the two-digit code, the LCD displays the
message. Make sure you entered the correct
NO TEL #
number and that the group has been registered correctly to
a speed dial code. See page 3-20.
If you make a mistake when dialing, press
try again.
and the transaction number while the MultiPASS is
AUTO REDIAL
AUTO REDIAL
TX/RX NO.
BUSY/NO SIGNAL
BUSY/NO SIGNAL
Sending Faxes With the MultiPASS L6000
button. The
REDIAL/PAUSE
XXXX
; try sending again later.
. You can
STOP
4-7