Resending A Fax After An Error - Canon MultiPASS L6000 User Manual

To Cancel Automatic Redialing
To cancel automatic redialing, press the
STOP
cannot cancel redialing while the LCD displays
waiting to redial). In this case, wait until dialing begins and then press
STOP
To cancel the redialing, press
LCD displays:
The unit then prints an error report:

Resending a Fax After an Error

If you get an error while sending a fax from memory, the MultiPASS can
resend it to the same destination without having to rescan it. To do this,
the On Error Resend option must be set in the Advanced: Send Fax dialog
box of the MultiPASS Desktop Manager. See page 8-5 for details.
You can also set how much of the fax is sent again:
The pages following the page on which the error occurred (ERROR
PAGES)
The first page of the document and the pages following that on which
the error occurred (ERROR & FIRST PAGES)
The entire document (ALL PAGES)
N
The fax is erased from memory after it is successfully sent or after the
resending fails.
4-8 Sending Faxes With the MultiPASS L6000
to cancel redialing. The MultiPASS asks you to confirm:
CANCEL? *YES #NO
TX/RX
TX/RX NO.
PRINTING REPORT
button. However, you
STOP
AUTO REDIAL
* . The MultiPASS L6000 beeps and the
CANCELLED
XXXX
(the unit is
Chapter 4