Receiving Faxes Automatically: Fax Only Mode; Setting Fax Only Mode - Canon MultiPASS C755 User Manual

Receiving Faxes Automatically: FAX ONLY MODE

If you have a separate telephone line for the MultiPASS, set FAX ONLY MODE for the
MultiPASS to answer all calls as fax calls.

Setting FAX ONLY MODE

Follow this procedure to set the receive mode to FAX ONLY MODE:
Function
1
Press
01
2
Press
Data Registration
Set
3
Press
08
4
Use
Set
5
Press
08
6
Use
Set
7
Press
08
8
Use
Set
9
Press
10
Press
Stop
11 Confirm that FaxOnly is displayed in the LCD.
• If FaxOnly is not displayed, press Receive
Mode to select FAX ONLY MODE. After a few
seconds, the LCD returns to standby mode.
The MultiPASS assumes all incoming calls are from fax machines sending faxes. It
receives the documents automatically and disconnects all voice calls.
n
In FAX ONLY MODE, you can control whether or not the MultiPASS rings when it receives
a fax call (1 INCOMING RING, p. 14-6). You can also set this option from the MultiPASS
Suite (1 MultiPASS Suite User's Guide ). Please note that even if you enable this option,
the MultiPASS will only ring if you have a telephone connected to it.
8-8
Receiving Faxes
.
.
.
02
to select RX SETTINGS.
or
.
02
to select RX MODE.
or
.
02
to select FAX ONLY MODE.
or
.
to return to standby mode.
DATA REGSTRATION
USER SETTINGS
RX SETTINGS
ECM RX
RX MODE
Ex:
FAX/TEL AUTO SW
FAX ONLY MODE
INCOMING RING
Ex:
12/27 FaxOnly
Ex:
12/27 FaxOnly
Chapter 8