Sending A Document Using Group Dialing - Canon MultiPASS C755 User Manual

Regular dialing:
Use the numeric buttons to enter the fax
number, then press
to the broadcast list.
• You can only enter one fax number this way.
n
• If you enter the incorrect destination, press
Function, then Clear. Then press Function
again, and enter the correct destination.
• You must enter the second number within
five seconds of entering the first number. All
subsequent numbers must be dialed within
10 seconds. If you wait longer than these
times, the MultiPASS begins scanning the
document for sending. If you prefer the
MultiPASS not to do this, disable the TIME
OUT setting. (1 p. 14-5)
• If you want to review the numbers you
entered, press Function and use d or u to
scroll through the numbers.
5
Press
or wait a few seconds for the MultiPASS to
begin scanning automatically.
• If you prefer the MultiPASS never to scan a
document automatically after a few seconds,
disable the TIME OUT setting. (1 p. 14-5)
• To cancel sending, press Stop then T. Sending to
all destinations you specified in step 4 will be
canceled. (You cannot cancel only one
destination.)
n
• If a number is busy, the unit will continue sending to the other destinations and then
redial the number that was busy.
• If the MultiPASS' memory becomes full while scanning your document, MEMORY FULL
will appear in the LCD. If this happens, remove the remainder of the document from the
ADF (you may need to open the operation panel to do so), then divide the document into
several sections and send each section separately.
• The document is automatically deleted from memory when the MultiPASS completes
sending the document to all destinations.

Sending a Document Using Group Dialing

If you frequently send faxes to the same group of people, you can create a group.
Groups are stored under one-touch speed dialing buttons or coded speed dialing
codes. For details, 1 p. 6-9.
7-14
Sending Faxes
Set
to add the number
Start
to begin scanning for sending,
Ex:
TEL=2 887 0166
Chapter 7