Before Using the
Machine
1
Specifying Recipients
Document and Paper
2
Sending and
Receiving
3
Copying
4
Printing
5
System Manager
Settings
6
Maintenance
7
Troubleshooting
8
Appendix
9
Table of Contents
Index
Follow the procedure below to send documents to registered
recipients.
Using One-Touch Speed Dialing Keys
■
You can specify up to 15 recipients using one-touch speed dialing
keys.
To use this feature, you must register recipients in one-touch speed dialing
keys beforehand. (See "Storing/Editing Address Book, " on p. 3-7.)
1.
Set documents.
If you want to adjust the image quality and density, see "Scan
Settings, " on p. 3-6.
2.
Press the desired one-touch speed dialing keys
(01 to 15).
If you pressed a wrong key, press [Stop/Reset] and try again.
Ex.
= 0 1 2 3 X X X X X X
[ 0 5 ] C A N O N
3.
Press [Start].
Back
Previous
Using Coded Speed Dialing Codes
■
You can specify up to 100 recipients using coded speed dialing
codes.
To use this feature, you must register recipients in coded speed dialing
codes beforehand. (See "Storing/Editing Address Book, " on p. 3-7.)
1.
Set documents.
If you want to adjust the image quality and density, see "Scan
Settings, " on p. 3-6.
2.
Press [ Coded Dial].
3.
Enter the desired two-digit code (00 to 99) with
the numeric keys.
Ex.
= 0 1 2 X X X X X X X
[ * 0 1 ] C A N O N
If you entered a wrong code, press [Stop/Reset], then try again from
step 2.
4.
Press [Start].
TOP
Next
3-14