Canon FaxPhone L90 Reference Manual page 133

Before Using the
Machine 1
NOT REGISTERED
Document and Paper
Description
2
Sending and
Receiving 3
Action
Copying
4 OUT OF TONER
CHANGE TONER
Printing
Description
5
Action
System Manager
PAPER JAM
Settings
6
OPEN TONER COVER
Maintenance
Description
7
Action
Troubleshooting
8
PRINTER DATA ERROR
CHECK PRINTER
Appendix
9
Description
Action
Action
Table of Contents
Index
No destination is registered for the one-touch
speed dialing key or coded speed dialing you
pressed.
Register the destinations before using the
Address Book function.
Toner has run out.
Install a new cartridge.
Paper jams have occurred in the machine.
Clear the paper jam (See "Paper Jams," on p. 8-5.)
and reload paper in the paper feeder.
The data from the PC was not printed.
Check if the software is installed properly or if the
printer cable is properly connected.
Check if the memory is full.
Back
REGISTERING KEY
CANNOT REGISTER
Description The selected one-touch speed dialing key is
already used as the group dialing key it is being
assigned to.
Action Select a different one-touch speed dialing key.
SET DOCUMENT
Description No document was set on the machine when
[Start] was pressed. (in the copy/fax mode)
Action Set a document.
SYSTEM ERROR
EXXX
Description A system error has occurred. <XXX> will be a
three-digit code that indicates a particular type
of error.
Action Unplug the machine. Wait for at least 5 seconds
and reconnect the power cord. If the message
persists, disconnect the power cord, and contact
your local authorized Canon dealer or the Canon
help line.
TOP
Previous Next
8-14