Canon FaxPhone L90 Reference Manual page 152

Before Using the
Machine 1
Printout is spotted or dirty.
Document and Paper
2
Sending and
Receiving 3
Paper jams occur.
Copying
4
Printing
5
System Manager
Settings
6
Maintenance
7
Troubleshooting
8
Appendix
9
Table of Contents
Index
A If the copy is spotted or dirty, clean the scanning
components and machine's interior (See "Cleaning the
Machine, " on p. 7-2.)
A Make sure the scanning platform is fully closed. (See
"Paper Jams, " on p. 8-5.)
Q Is the document loaded correctly?
A Make sure the document is correctly loaded. (See "Set
Up the Machine, " in the Starter Guide.)
Q Is the correct type of paper loaded in the machine?
A Make sure you load paper that meets the
requirements for use. (See "Paper Requirements, " on
p. 2-5.)
Back
Printout is skewed.
Q Is the paper loaded correctly?
A Make sure the paper is correctly loaded in the
machine. (See "Set Up the Machine, " in the Starter
Guide.)
Printout is not clear.
Q Is the correct type of paper loaded in the machine?
A Make sure you load paper that meets the
requirements for use. (See "Paper Requirements, " on
p. 2-5.)
Q Are you printing on the wrong side of the paper?
A Some papers have a "right" side for printing. If the
printout quality is not as clear as you think it should
be, try printing on the other side of the paper
TOP
Previous Next
8-33