Canon FaxPhone L90 Reference Manual page 46

Before Using the
Machine 1
Setting Paper Size and Type
Document and Paper
2
Sending and
Receiving 3
Copying
4
Printing
5
System Manager
Settings
6
Maintenance
7
Troubleshooting
8
Appendix
9
Table of Contents
Index
The default setting is <LTR> and <PLAIN PAPER>. When you
place other sizes and/or types of paper, follow this procedure to
change the settings.
1.
Press [Menu].
2.
Press [ ] or [ ] to select <PAPER SETTINGS>,
then press [OK].
3.
Press [ ] or [ ] to select <CASSETTE>, then
press [OK].
4.
Press [ ] or [ ] to select <PAPER SIZE>, then
press [OK].
5.
Press [ ] or [ ] to select the paper size, then
press [OK].
You can select from the following paper sizes:
<LTR>, <LGL>, <A4>, <OFICIO>, <BRAZIL-OFICIO>, <MEXICO-
OFICIO>, <FOLIO>, <GOVERNMENT-LETTER>, <GOVERNMENT-
LEGAL>, and <FOOLSCAP>
The available paper size will vary depending on the country where
the unit was purchased.
Back Previous
6.
Press [OK].
7.
Press [ ] or [ ] to select <PAPER TYPE>, then
press [OK].
8.
Press [ ] or [ ] to select the paper type, then
press [OK].
You can select from the following paper types:
<PLAIN PAPER> or <PLAIN PAPER L>*
2 2
(64 g/m to 90 g/m ))
<HEAVY PAPER> or <HEAVY PAPER H>*
feeder: 28 lb to 34 lb (105 g/m 2 to 128 g/m
<TRANSPARENCY> for Transparency
* 1 If paper curls excessively when printed with <PLAIN PAPER>
selected, select <PLAIN PAPER L>.
* 2 If print fixing is not sufficient when printed with <HEAVY PAPER>
selected, select <HEAVY PAPER H>.
9.
Press [Stop/Reset] to return to the standby
mode.
TOP
Next
1 for Plain paper (17 lb to 24 lb
2 for Heavy paper (Paper
2 )), or Envelope
2-11