Canon FaxPhone L90 Reference Manual page 54

Before Using the
Machine 1
Document and Paper
2
Sending and
Receiving 3
Copying
4
Printing
5
System Manager
Settings
6
Maintenance
7
Troubleshooting
8
Appendix
9
Table of Contents
Index
5.
Enter the recipient name (max. 20 characters,
including spaces) with the numeric keys, then
press [OK].
Ex.
N A M E
C a n
If you do not want to register the recipient name, press [OK] again to
proceed to the next.
6.
Enter the fax/telephone number you register
(max. 50 digits, including spaces and pauses)
with the numeric keys, then press [OK].
Ex.
T E L N U M B E R E N T R Y
0 1 2 X X X X X X X _
Press [Pause] to enter a pause. (See "Dialing an Overseas Number
(With Pauses), " on p. 3-20.)
[ A ]
Back Previous
7.
Press [ ] or [ ] to select <ON>, then press
[OK].
If no subaddress or password is required, press [
select <OFF>, then press [OK]. And press [Stop/Reset] to return to
the standby mode.
8.
Enter the subaddress number you register (max.
20 digits) with the numeric keys, then press
[OK].
If you want to attach a subaddress to your send job, make sure that
the recipient's fax machine supports ITU-T standard subaddresses.
Ex.
S U B A D D R E S = 1 2 3 4 _
9.
Enter the password you register (max. 20 digits)
with the numeric keys, then press [OK].
Ex.
P A S S W O R D = 5 6 7 8 _
10.
Press [Stop/Reset] to return to the standby
mode.
TOP
Next
] or [ ] to
3-8