Maintenance; Press [ ] Or; Appendix 9 - Canon FaxPhone L90 Reference Manual

Before Using the
Machine 1
Document and Paper
2
Sending and
Receiving 3
Copying
4
Printing
5
System Manager
Settings
6

Maintenance

7
Troubleshooting
8
Appendix
9
Table of Contents
Index
6.
If you want to set a password, press [
[ ] to select <PASSWORD>, then press [OK].
If you do not need to set a password, skip to step 8.
7.
Use the numeric keys to enter the memory lock
reception password (up to seven digits), then
press [OK].
Ex.
P A S S W O R D = 5 6 7 8 _
If the memory lock password has already been set, press [
repeatedly to go to the digit you want to change, and then press
[Clear]. Enter a new number with the numeric keys, then press [OK].
8.
If you want to specify <MEMORY RX TIME>,
press [ ] or [ ] to select <MEMORY RX
TIME>, then press [OK].
If you do not need to set the timer for memory lock, skip to step 12.
9.
Press [ ] or [ ] to select <ON>, then press
[OK].
10.
For <MEM. RX START TIME>, use the numeric
keys to enter the start time (in 24-hour military
time format), then press [OK].
Ex.
M E M . R X S T A R T T I M E
0 0 : 0 0
11.
] or For <MEM. RX END TIME>, use the numeric keys
to enter the end time (in 24-hour military time
format), then press [OK].
12.
Press [Stop/Reset] to return to the standby
mode.
Printing All Documents Stored in Memory
1.
Perform step 1 to 3 in "Memory Lock Reception,"
]
on p. 3-25.
2.
Press [
then press [OK].
3.
Use the numeric keys to enter the memory lock
reception password, then press [OK].
4.
Press [
[OK].
The received documents are printed.
5.
Press [Stop/Reset] to return to the standby
mode.
Back Previous Next
] or [ ] to select <MEMORY LOCK>,
] or [ ] to select <OFF>, then press
TOP
3-26