Canon FaxPhone L90 Reference Manual page 141

Before Using the
Machine 1
Document and Paper
2
Sending and
Receiving 3
Copying
4
Printing
5
System Manager
Settings
6
Maintenance
7
Troubleshooting
8
Appendix
9
Table of Contents
Index
Q Are there other documents being sent from
memory?
A Allow time for the documents to finish sending.
Q Has an error occurred during transmission?
A Check the LCD for an error message. (See "LCD
Messages, " on p. 8-10.)
A Print an Activity Report and check for an error.
(See "ACTIVITY REPORT, " on p. 9-22.)
Q Is the telephone cable connected properly?
A Make sure the cable is connected properly. (See
"Before FAX Setting, " in the Starter Guide.)
Q Is the telephone line working properly?
A Make sure there is a dial tone when you press
[Hook] or when you lift the handset of any external
telephone connected to the machine. If there is no
dial tone, contact your local telephone company.
Back Previous
Q Is the recipient's machine a G3 fax machine?
A Make sure the recipient's machine is compatible with
your machine.
Q Did the recipient's machine answer within 35
seconds (after all automatic redialing attempts)?
A Ask the recipient to check the machine. For an
overseas call, add pauses to the registered number.
(See "Dialing an Overseas Number (With Pauses), " on
p. 3-20.)
Q Is the Processing/Data indicator lit?
A The external phone is busy. Please wait until the
external phone becomes free.
Q Is the machine overheated?
A Unplug the machine and let it cool for about 5
minutes. Then plug in the machine and try sending
again.
TOP
Next
8-22