Canon FaxPhone L90 Reference Manual page 164

Before Using the
Machine 1
FAX SETTINGS
Document and Paper
3. TX SETTINGS
2
Sending and
Receiving 3
Copying
4
Printing
5
System Manager
Settings 6
Maintenance
4. RX SETTINGS
7
Troubleshooting
8
Appendix
9
Table of Contents
Index
1. AUTO REDIAL
ON
1. REDIAL TIMES
2. REDIAL INTERVAL
OFF
2. DIALING LINE CHCK
1. FAX/TEL OPT. SET
RING START TIME
F/T RING TIME
F/T SWITCH ACTION
Sets the transmission features.
Sets whether to redial automatically when the other line is busy or a transmission error occurs.
(See "Redialing Automatically," on p. 3-19.)
Customizes the redial operation.
Sets the number of retries. (1TIMES–10TIMES (2TIMES))
Sets period of time before redialing. (2MIN.–99MIN. (2MIN.))
After the first attempt at dialing fails, redialing is not attempted.
Sets whether to check the telephone line condition.
– OFF
– ON
Sets the reception features.
Sets the optional items in the <FaxTel> mode. (See "FAX/TEL: Optional Settings," on p. 3-23.)
Sets the time the machine takes to check whether a call is a fax or a voice call. (4SEC–30SEC
(6SEC))
Selects the ring length for voice calls. (10SEC–45SEC (22SEC))
Selects whether the machine switches to the receive mode after the ring time has elapsed, or
whether if disconnects the call.
– RECEIVE
– DISCONNECT
Back Previous Next
TOP
9-8