Storing/Editing Group Dialing - Canon FaxPhone L90 Reference Manual

Before Using the
Machine 1
Document and Paper
2
Sending and
Receiving 3
Copying
4
Printing
5
System Manager
Settings
6
Maintenance
7
Troubleshooting
8
Appendix
9
Table of Contents
Index
Deleting One-Touch Speed Dialing Keys/ Coded
Speed Dialing Codes
1.
Press [Menu].
2.
Press [ ] or [ ] to select <ADDRESS BOOK
SET.>, then press [OK].
3.
Press [ ] or [ ] to select <1-TOUCH SPD
DIAL> or <CODED DIAL>, then press [OK].
4.
Press [ ] or [ ] to select the one-touch
speed dialing key (01 to 15) or coded speed
dialing code (00 to 99) you want to delete, then
press [OK].
You can also select a one-touch speed dialing key or coded speed
dialing code by pressing the corresponding one-touch speed dialing
key, or [Coded Dial] followed by the two-digit code.
5.
Press [OK].
6.
Press and hold [Clear] to delete the entire entry,
then press [OK].
If you delete the fax number, the registered name is cleared
automatically.
Back Previous
7.
Press [Stop/Reset] to return to the standby
mode.

Storing/Editing Group Dialing

■
The recipients must be registered in one-touch speed dialing keys or coded
speed dialing codes beforehand.
Registering Group Dialing
1.
Press [Menu].
2.
Press [ ] or [ ] to select <ADDRESS BOOK
SET.>, then press [OK].
3.
Press [ ] or [ ] to select <GROUP DIAL>,
then press [OK].
4.
Press [ ] or [ ] to select an empty one-touch
speed dialing key that you want to set as the
group address, then press [OK].
You can also select a one-touch speed dialing key by pressing the
corresponding one-touch speed dialing key.
TOP
Next
3-10