Canon FaxPhone L90 Reference Manual page 55

Before Using the
Machine 1
Document and Paper
2
Sending and
Receiving 3
Copying
4
Printing
5
System Manager
Settings
6
Maintenance
7
Troubleshooting
8
Appendix
9
Table of Contents
Index
Editing One-Touch Speed Dialing Keys/ Coded
Speed Dialing Codes
1.
Press [Menu].
2.
Press [ ] or [ ] to select <ADDRESS BOOK
SET.>, then press [OK].
3.
Press [ ] or [ ] to select <1-TOUCH SPD
DIAL> or <CODED DIAL>, then press [OK].
4.
Press [ ] or [ ] to select the one-touch
speed dialing key (01 to 15) or coded speed
dialing code (00 to 99) you want to edit, then
press [OK].
You can also select a one-touch speed dialing key or coded speed
dialing code by pressing the corresponding one-touch speed dialing
key, or [Coded Dial] followed by the two-digit code.
5.
Press [ ] repeatedly to go to the character you
want to change, then press [Clear].
To delete the entire entry, press and hold [Clear].
6.
Enter a new character with the numeric keys,
then press [OK].
Back Previous
7.
Press [ ] repeatedly to go to the wrong digit,
then press [Clear] to delete it.
To delete the entire entry, press and hold [Clear].
8.
Enter a new number with the numeric keys, then
press [OK].
9.
If you want to change or enter the subaddress,
press [ ] or [ ] to select <ON>, then press
[OK].
If no subaddress is required, skip to step14.
10.
Press [ ] repeatedly to go to the digit you
want to change, then press [Clear] to delete it.
11.
Enter a new subaddress with the numeric keys,
then press [OK].
12.
Press [ ] repeatedly to go to the digit you
want to change, then press [Clear] to delete it.
13.
Enter a new password with the numeric keys,
then press [OK].
14.
Press [Stop/Reset] to return to the standby
mode.
TOP
Next
3-9