Confirming Entered Fax Numbers; Restricting Redial; Receiving Problems - Canon FaxPhone L90 Reference Manual

Before Using the
Machine 1
Sending of documents is too slow.
Document and Paper
2
Sending and
Receiving 3
Copying
4
Errors occur frequently while sending.
Printing
5
System Manager
Settings
6
Maintenance
7
Cannot redial with [Redial].
Troubleshooting
8
Appendix
9
Table of Contents
Index
Q Is the resolution set to <FINE>, <PHOTO> or
<SUPER FINE>?
A Setting the resolution to <STANDARD> reduces the
sending time.
Q Are the telephone lines in poor condition, or do
you have a bad connection?
A Check if there is a device nearby that interferes with
signal transmission (e.g., microwave oven).
Q Is <RESTRICT REDIAL> set to <ON>?
A When <RESTRICT REDIAL> is set to <ON>, Redialing is
not available. (See "Restricting Redial, " on p. 6-3.)
Back
Entering the fax number is required again after pressing [Start].
Q Is <CONFIRM FAX NO.> set to <ON>?
A When <CONFIRM FAX NO.> is set to <ON>, you need
to enter the fax number again after pressing [Start].
(See "Confirming Entered Fax Numbers, " on p. 6-3.)

Receiving Problems

■
Cannot receive a fax automatically.
Q Is the machine set to receive automatically?
A For the machine to receive faxes automatically, the
receive mode must be set to <FaxOnly>, <FaxTel>,
<AnsMode>, or <DRPD>. If you have set <AnsMode>,
confirm that an answering machine is connected to
the machine and that it is turned on with an outgoing
message properly recorded. (See "Basic Receiving
Method, " on p. 3-22.)
TOP
Previous Next
8-24