Canon FaxPhone L90 Reference Manual page 84

Before Using the
Machine 1
Scan Settings
Document and Paper
2
Sending and
Receiving 3
Copying
4
Printing
5
System Manager
Settings
6
Maintenance
7
Troubleshooting
8
Appendix
9
Table of Contents
Index
Before pressing [Start] to begin copying, you can adjust the
settings to better suit the document to be scanned. These
settings return to the default values if the machine remains idle
for one minute or if you press [Stop/Reset].
Image Quality
■
The default setting is <TEXT/PHOTO>.
1.
Press [Copy].
2.
Press [Image Quality] repeatedly to select the
document type.
<TEXT>: for text documents
<PHOTO>: for documents that contain fine text or photos
<TEXT/PHOTO>: for documents that contain text and photos
– When you press [Stop/Reset], the setting will be canceled.
If you want to keep the settings, set the image quality as
following:
[Menu] → <COPY SETTINGS> → <STANDARD SETTINGS> →
<IMAGE QUALITY> → Press [
document type.
– Copy density automatically changes to the manual mode when
<TEXT/PHOTO> or <PHOTO> is set.
] or [ ] to select the desired
Back Previous
Density
■
You can adjust the density to the most appropriate level for the
document either automatically or manually.
The default setting is <MANUAL> (5).
Adjusting Automatically
1.
Press [Copy].
2.
Press [Density] repeatedly to select <AUTO>,
then press [OK].
The image quality is automatically set to <TEXT>.
TOP
Next
4-3