Sending And; Sending And Receiving; System Manager 6; Maintenance 7 - Canon FaxPhone L90 Reference Manual

Before Using the
Machine 1

Basic Receiving Method

Document and Paper
2

Sending and

Receiving 3
Copying
4
Printing
5
System Manager
Settings
6
Maintenance
7
Troubleshooting
8
Appendix
9
Table of Contents
Index
Follow this procedure to set the machine for receiving faxes.
The default setting is <FaxOnly>.
Any data stored in the memory, including received fax documents, will be
deleted if you disconnect the power cord of the machine.
1.
Press [Menu].
2.
Press [ ] or [ ] to select <FAX SETTINGS>,
then press [OK].
3.
Press [ ] or [ ] to select <RX MODE>, then
press [OK].
Back Previous
4.
Press [ ] or [ ] to select the receive mode,
then press [OK].
<FaxOnly>: Answers all calls as faxes.
<AnsMode>: Receives faxes automatically and records voice
messages.
<DRPD> (Distinctive Ring Pattern Detection): Distinguishes between
fax and voice calls using distinctive ring patterns. Select the ring
pattern assigned by your telephone company. For optional settings,
see "DRPD: Optional Settings, " on p. 3-24.
<FAX/TEL>: Switches between fax and voice calls automatically if the
handset or an external telephone is connected to the machine. For
optional settings, see "FAX/TEL: Optional Settings, " on p. 3-23.
<MANUAL>: Does not answer any calls. You have to manually receive
faxes. See "Manual Reception, " on p. 3-24.
– For <FAX/TEL> or <MANUAL>, make sure the handset or an
external telephone is connected to the machine.
– For <AnsMode>, make sure an external telephone with built in
answering machine is connected to the machine.
– For <DRPD>, subscription to a DRPD service is required. Contact
your telephone company for availability.
5.
Press [Stop/Reset] to return to the standby
mode.
TOP
Next
3-22