Canon FaxPhone L90 Reference Manual page 144

Before Using the
Machine 1
Document and Paper
2
Sending and
Receiving 3
Copying
4
Printing
5
System Manager
Settings
6
Maintenance
7
Troubleshooting
8
Appendix
9
Table of Contents
Index
Q Are documents stored in memory, leaving little or
no memory available?
A Print, send, or delete any documents stored in
memory.
Q Has an error occurred during reception?
A Check the LCD for an error message. (See "LCD
Messages, " on p. 8-10.)
A Print an Activity Report and check for an error. (See
"ACTIVITY REPORT, " on p. 9-22.)
Q Is paper loaded in the machine?
A Make sure paper is loaded in the machine. (See "Set
Up the Machine, " in the Starter Guide.)
Q Is the telephone cable connected properly?
A Make sure the cable is connected properly. (See
"Before FAX Setting, " in the Starter Guide.)
Back
No automatic switching between telephone and fax calls.
Q Is the machine set to switch automatically between
telephone and fax calls?
A For the machine to switch between fax and telephone
calls automatically, the receive mode must be set to
<FaxTel>, <AnsMode>, or <DRPD>. If you have set
<AnsMode>, confirm that an answering machine is
connected to the machine and that it is turned on
with an outgoing message properly recorded. (See
"Basic Receiving Method, " on p. 3-22.)
Q Are documents stored in memory, leaving little or
no memory available?
A Print, send, or delete any documents stored in
memory.
Q Has an error occurred during reception?
A Check the LCD for an error message. (See "LCD
Messages, " on p. 8-10.)
A Print an Activity Report and check for an error. (See
"ACTIVITY REPORT, " on p. 9-22.)
TOP
Previous Next
8-25