Canon FaxPhone L90 Reference Manual page 147

Before Using the
Machine 1
Part of the documents you receive are cut off.
Document and Paper
2
Sending and
Receiving 3
Copying
4
Printing
5
System Manager
Settings
6
Maintenance
7
Troubleshooting
8
Appendix
9
Table of Contents
Index
Q Are the slide guides of the paper feeder set to the
size of the paper?
A Adjust the guides of the paper feeder to the size of
the paper.
Q Have you specified the correct paper size for the
paper feeder?
A Specify the correct paper size for the paper feeder.
Q Is the toner low or unevenly distributed?
A Redistribute the toner inside the toner cartridge. If
the problem persists, replace the toner cartridge. (See
"Replacing the Toner Cartridge, " on p. 7-8.)
Q Is the printing method for received documents set
to <CUT>?
A If you want to print a received document without
cutting off the end, set the printing method to <ON>
or <OFF>. (See "Received Image Reduction, " on
p. 3-29.)
Back
Cannot receive using Error Correction Mode (ECM).
Q Does the sender's machine support ECM?
A If the sender's machine does not support ECM, the
document is received in normal mode without error
checking.
Receiving of documents is too slow.
Q Is the resolution of the sender's machine set
higher?
A Contact to the sender and make sure the resolution of
the sender's machine has been set properly.
TOP
Previous Next
8-28