Canon FaxPhone L90 Reference Manual page 57

Before Using the
Machine 1
Document and Paper
2
Sending and
Receiving 3
Copying
4
Printing
5
System Manager
Settings
6
Maintenance
7
Troubleshooting
8
Appendix
9
Table of Contents
Index
5.
Enter the group name (max. 20 characters,
including spaces) with the numeric keys, then
press [OK].
To register another group, repeat the procedure from step 4.
Ex.
N A M E
C a n o n G r o u p
6.
Select the recipients you want to register in the
group (max. 50 recipients) until all recipients are
registered, then press [OK].
To enter a recipient stored under a one-touch speed dialing key,
press the desired one-touch speed dialing key.
To enter a recipient stored under a coded speed dialing code, press
[Coded Dial], then enter the two-digit code with the numeric keys.
For multiple entries, press [Coded Dial] between each entry.
You can review the destinations which have been already entered
with [ ] or [ ].
7.
Press [Stop/Reset] to return to the standby
mode.
[ A ]
Back Previous
Adding New Recipients to Group
1.
Press [Menu].
2.
Press [ ] or [ ] to select <ADDRESS BOOK
SET.>, then press [OK].
3.
Press [ ] or [ ] to select <GROUP DIAL>,
then press [OK].
4.
Press [ ] or [ ] to select a group to edit, then
press [OK].
You can specify a group to edit by pressing the corresponding one
touch speed dialing key.
5.
Press [OK].
6.
Select the recipient you want to add to the
group, then press [OK].
For details on specifying a recipient from Address Book, see
"Registering Group Dialing, " on p. 3-10.
7.
Press [Stop/Reset] to return to the standby
mode.
TOP
Next
3-11