Polling - Canon FaxPhone L90 Reference Manual

Before Using the
Machine 1
Document and Paper
2
Sending and
Receiving 3
Copying
4
Printing
5
System Manager
Settings
6
Maintenance
7
Troubleshooting
8
Appendix
9
Table of Contents
Index
3.
Press [ ] or [ ] to select <DELAYED TX>,
then press [OK].
4.
Use the numeric keys to enter the time of
transmission (in 24-hour military time format),
then press [OK].
Ex.
T X T I M E S E T . = 2 0 : 0 0
5.
Use the numeric keys, one-touch speed dialing
keys, coded speed dialing codes, or [Address
Book] key to enter a destination, then press
[OK].
You can use the following features to send a fax by pressing [Add.
Mode].
<BROADCAST>: Sends the same document to multiple recipients at
a time. (See "Broadcasting, " on p. 3-30.)
<POLLING RX>: Retrieve documents stored in remote machines for
polling. (See "Polling Receiving, " on p. 3-32.)
<RELAY>: Sends a document to be relayed to other recipients. (See
"Relay, " on p. 3-33.)
6.
Press [Start] to scan the document for the
delayed sending.
Back Previous

Polling

■
Polling Sending
Polling sending enables you to send a document in response to the
recipient machine's request.
You can store up to 30 documents in the memory.
1.
Set documents.
2.
Press [Add.Mode].
3.
Press [ ] or [ ] to select <POLLING TX>, then
press [OK].
4.
Press [ ] or [ ] to select <SINGLE> or
<MULTI>, then press [OK].
<SINGLE>: The document will be deleted after it is sent to a recipient.
<MULTI>: The document will be retained in memory until manually
deleted.
TOP
Next
3-31