Canon FaxPhone L90 Reference Manual page 142

Before Using the
Machine 1
Memory fills up immediately when you try to send.
Document and Paper
2
Sending and
Receiving 3
Copying
4
Printing
5
System Manager
Settings
6
Maintenance
7
Troubleshooting
8
Appendix
9
Table of Contents
Index
Q Are you sending with the resolution set to <SUPER
FINE>?
A If you want to keep your document quality, divide the
document into some parts and send them separately.
A If your document does not contain fine text or
photographs, set the resolution to <STANDARD>.
A If your document contains fine text or photographs,
send it directly rather than using a memory
transmission.
Q Is a document stored in memory, leaving little
memory available?
A Print, send, or delete any documents stored in
memory.
Back
Faxes sent from the machine are spotted or dirty.
Q Is the recipient's machine working properly?
A Check the machine by making a copy. If the copy is
clear, the problem may be in the recipient's machine.
If the copy is spotted or dirty, clean the scanner
components. (See "Scanning Area, " on p. 2-3.)
Q Is the document loaded correctly?
A Make sure the document is correctly loaded. (See
"Loading Documents, " on p. 2-4.)
The documents you sent are too light.
Q Is the density setting changed to be lighter?
A Adjust the density for light documents to be darker.
(See "Density, " on p. 3-6.)
Q Are the scanning components of the machine
clean?
A If the received document is spotted or dirty, clean the
scanning components. (See "Scanning area, " on p. 7-6.)
TOP
Previous Next
8-23