DOK-CONTRL-S67DIO8M12*-AP03-EN-P
Rexroth IndraControl S67 Digital Module 8 Inputs/Outputs – 0.5 A (8×M12)
11
Diagnostics via LED Signals
11.1
General information
11.2
Operating Messages of the Module
For on-site diagnostics, the S67-DIO8-M12×8 module has different LEDs in‐
dicating the operating states of module and S-BUS.
The following table lists the operating messages indicated via LEDs. Informa‐
tion on remedies of certain causes is also provided.
Diagnostics can be disabled
Disable specific diagnostics (see F- and Er-LED) using the diag‐
nostic overview (see
45). In this case, the corresponding LED is not active (off).
17
Fig. 11-1:
LEDs indicating operating messages
Bosch Rexroth AG
Diagnostics via LED Signals
chapter 8.2 "Diagnostic Overview" on page
15
DIO8x8
16
19 18
69/93
17