Operation Mode "Do Module - Bosch Rexroth IndraControl S67 Manual

DOK-CONTRL-S67DIO8M12*-AP03-EN-P
Rexroth IndraControl S67 Digital Module 8 Inputs/Outputs – 0.5 A (8×M12)
8.4

Operation Mode "DO Module"

Parameter Description
DO module:
Operated as digital output module
DI module:
Operated as digital input module
DIO module:
Operation mode
Operated as digital input and output module
DIO module + 1 counters:
Operated as digital input and output module with a counter
DIO module + 2 counters:
Operated as digital input and output module with two counters
Tab. 8-3: Overview on operation modes
Operation mode change
After changing the operation mode, restart the IndraControl S67
system.
Parameter Description
Diagnostics Enable/disable the channel-specific diagnostics:
- Lock
- Unlock
Substitute value The substitute value strategy outputs the substitute value or
strategy the last output value (e.g a field bus is interrupted).
The following options are available:
- Add substitute value
- Retain last value
Substitute value Enter the process value output in case of error. In case of error
(e.g. field bus interruption), this value is used for the substitute
value strategy "Add substitute value".
Control panel disabled:
- 0 ①
Control panel enabled:
- 1
Delivery state
①
The last value is a value reported at the contact before the in‐
②
terference. This value can be a "process value" for example
Tab. 8-4: Overview on the settable parameters for the "DO module" mode
Bosch Rexroth AG
①
①
②
47/93
Parameterization