DOK-CONTRL-S67DIO8M12*-AP03-EN-P
Rexroth IndraControl S67 Digital Module 8 Inputs/Outputs – 0.5 A (8×M12)
4.9.8
Effect of Operating States
4.9.9
Counters 1 and 2 (Parameterizable)
4.9.10
Parameterizable Functions
Switching frequency
Recommended minimum load
Parallel switching of 2 outputs
Type of protective circuit
Output resistance
Incorrect diagnostics can be caused by high switching frequen‐
*
cies with low load
Tab. 4-11:
Actuator selection
CPU stop of PLC
Supply voltage under rated voltage toler‐
ance
Disconnection of supply voltage
Working method of the output
Response in case of overload
Tab. 4-12:
Operating states
Event counter/gate counter/pulse duration counter
Connection
Number (can be parameterized)
Signal shape
Counting depth
Counting/switching frequency
Tab. 4-13:
Data counter
Operation mode (per module)
Counter
Bosch Rexroth AG
Device Description
Inductive load, approx. 20 Hz
Ohmic load, approx. 500 Hz
Lamp load, approx. 500 Hz
50 mA
*
For power increase
For redundant load actuation
External protection (e.g. free-wheeling di‐
odes)
< 0.4 Ω
Acc. to substitute value strategy
0 V status
0 V status
Non-storing
Automatic restart
2 of 8 channels can be configured as
counter input
2
Square pulses
16 bits
0 Hz ... 1 kHz
(depends on the S-BUS cycle)
Output module
Input module
Input and output module
Input and output module + 1 counters
Input and output module + 2 counters
Counting direction/limit value, switching
output, gate time
23/93