Structuring The Documentation - Bosch Rexroth IndraControl S67 Manual

DOK-CONTRL-S67DIO8M12*-AP03-EN-P
Rexroth IndraControl S67 Digital Module 8 Inputs/Outputs – 0.5 A (8×M12)
Purpose
1.4

Structuring the Documentation

Mounting
Product
Selection
phases (assembly/installation)
Presales Aftersales
Design engineer
Mechanic/
electrician
Programmer
Technologist
Target
Process
groups
specialist
Select
Prepare
Activities
Design
Construct
Fig. 1-1: Assigning this documentation to the target groups, product phases
and target group activities
This documentation is intended for users commissioning a decentralized digi‐
tal input and output module of type S67-DIO8-M12×8. This documentation
contains general information on the input and output module. Mounting and
cabling of the input and output module are also described. The basic com‐
missioning steps and the configuration of the IndraControl S67 station are
then explained.
The first part of the documentation contains important information on the in‐
tended use as well as information on the safety instructions
portant Instructions on Use" on page 9
structions" on page 11).
For a short overview on the structure and the functions of the digital input and
output module, refer to chapter 4 "Device Description" on page
For the mounting description of the digital input and output module, refer to
chapter 5 "Mounting the Module" on page
For information on data and supply cables, refer to
Data and Supply Cables" on page
For the commissioning of the digital input and output module, refer to
7 "Commissioning" on page
For the parameterization of the module, refer to
on page 45.
For information on the process images of the digital input and output module,
refer to chapter 9 "Process Images" on page
For the counter functionality of the module, refer to
Function" on page 63.
For the diagnostic options regarding the digital input and output module, refer
to chapter 11 "Diagnostics via LED Signals" on page
For information on the module exchange, refer to
and Service" on page 73.
For information on the module usage in safety applications, refer to
13 "Using Interference-Free Module in Safety Applications" on page
Bosch Rexroth AG
Engineering Commissioning
Programmer
Commissioning engineer
Technologist
Process specialist
Unpack Parameterize Optimize
Mount Program Test
Install Configure
Simulate
and chapter 3 "Using safety in‐
27.
35.
43.
chapter 8 "Parameterization"
53.
7/93
About this Documentation
Operation Decommissioning
Machine
operator
Maintenance Mechanic/
technician electrician
Service Disposal company
Operate Dismount
Maintain Dispose
Remove
faults
Create
the NC program
(chapter 2 "Im‐
13.
chapter 6 "Connecting
chapter
chapter 10 "Counter
69.
chapter 12 "Maintenance
chapter
75.