Leds On The I/O Connectors; Reporting Diagnostics Via Pdi - Bosch Rexroth IndraControl S20 System And Installation Manual

DOK-CONTRL-S20*SYS*INS-AP02-EN-P
IndraControl S20 System and Installation
9.3.2

LEDs on the I/O connectors

Designa- Color Meaning
tion
xx Yellow Status of the input or output
yy Red Diagnostics of the output
Fig. 9-6 LEDs on the I/O connectors
9.4

Reporting diagnostics via PDI

Refer to the module-specific documentation for information about the
diagnostics and status indicators on each module and their meanings.
The LEDs on the I/O connectors are numbered according to the terminal points.
All LED locations are numbered even when they are not used.
70 71 72 73 74 75
60 61 62 63 64 65
50 51 52 53 54 55
40 41 42 43 44 45
D 00 01 02 03 04 05
UI 10 11 12 13 14 15
E1 20 21 22 23 24 25
E2 30 31 32 33 34 35
Fig. 9-5 LEDs on the I/O connectors (e.g., S20-DI-16/4, S20-DO-16/3)
State
ON
OFF
ON
OFF
xx Channel identification
yy Channel identification
Fig. 9-6 lists commonly used LEDs. More LEDs may also be found on
the modules.
The available LEDs of a module and their meanings can be found in
the module-specific documentation.
The malfunctions indicated by the local diagnostics and status indicators are also
mapped in PDI object 0018
Detailed information can be found in
page 105 and in the module-specific data sheet.
Bosch Rexroth AG
Diagnostics and status indicators
76 77 70 71
66 67 60 61
56 57 50 51
46 47 40 41
06 07 D 00 01
16 17 UO 10 11
26 27 E1 20 21
36 37 30 31
Description
Corresponding input/output set
Corresponding input/output not set
Error at the output
No error at the output
(DiagState).
hex
Chapter "Objects for diagnostics" on
85/122
72 73 74 75 76 77
62 63 64 65 66 67
52 53 54 55 56 57
42 43 44 45 46 47
02 03 04 05 06 07
12 13 14 15 16 17
22 23 24 25 26 27
32 33 34 35 36 37