Type Plate; Schematic Diagram - Bosch Rexroth IndraControl S67 Manual

18/93 Bosch Rexroth AG
Device Description
4.6

Type Plate

4.7

Schematic Diagram

Rexroth IndraControl S67 Digital Module 8 Inputs/Outputs – 0.5 A (8×M12)
Position Description
36 Power consumption and voltage specifications
37 Module name
Tab. 4-4: Labeling and symbols
A type plate is located at the side of the S67-DIO8-M12×8 module. This type
plate contains important information used for tracing in case of claims or
complaints:
① Type code
② Parts number
③ Technical index
④ Date of manufacture
⑤ Serial number
Fig. 4-5: Type plate
The following schematic diagram provides an overview on the power supply
and the mode of operation of power supply connections as well as the digital
module inputs and outputs (see also
bles" on page 37 and chapter 6.5 "Connecting Sensor/Actuator Cables" on
page 39).
Note that the field supply of the sensors and actuators is provided by U
distributed to all module connections (pin 1 each).
DOK-CONTRL-S67DIO8M12*-AP03-EN-P
chapter 6.4 "Connecting Supply Ca‐
and
A