30/93
Bosch Rexroth AG
Mounting the Module
5.6
Mounting on Profile Rail (only with Bosch Rexroth Accesso‐
ries)
5.6.1
Fastening Profile Adapter on the Module
Rexroth IndraControl S67 Digital Module 8 Inputs/Outputs – 0.5 A (8×M12)
Fig. 5-3:
Mounting the mounting rail adapter
In addition to the attachment using a mounting rail adapter, the S67-DIO8-
M12×8 module can be fastened to a profile rail using a profile adapter and
nuts. It is required that the system supports this attachment type. The nuts
are not included in the scope of delivery.
Screw together the S67-DIO8-M12×8 module and the profile adapter using
the M4 threaded screws provided, as shown in the figure below.
DOK-CONTRL-S67DIO8M12*-AP03-EN-P
50
51
52