Unintended Use - Bosch Rexroth IndraControl S67 Manual

10/93 Bosch Rexroth AG
Important Instructions on Use
2.2

Unintended Use

Rexroth IndraControl S67 Digital Module 8 Inputs/Outputs – 0.5 A (8×M12)
Field bus coupler
S67-PB-BK-DI8-M8
S67-PN-BK-DI8-M8
S67-ET-BK-DI8-M8
S67-S3-BK-DI8-M8
Tab. 2-1: Technical index and supported operating modes of the S67-DIO8-
M12×8 module
The S67-DIO8-M12×8 module may only be used with the acces‐
sories and mounting parts listed in this documentation. Compo‐
nents that are not expressly mentioned must neither be attached
nor connected. The same is valid for cables and lines.
Operation may only be carried out with the hardware component
configurations and combinations that are expressly specified and
with the software and firmware indicated and specified in the re‐
spective documentation and functional descriptions.
In case of non-compliance, the guarantee and warranty claims
shall automatically expire.
The S67-DIO8-M12×8 may only be operated under the mounting and instal‐
lation conditions, the position, and the ambient conditions (temperature, de‐
gree of protection, humidity, EMC, etc.) specified in the related documenta‐
tion.
The use of the S67-DIO8-M12×8 module in applications other than the mod‐
ules specified or described in the documentation and the technical specifica‐
tions is considered as "unintended".
The S67-DIO8-M12×8 module must not be used if
● operation conditions which do not correspond to the specified ambient
conditions Operation under water, extreme temperature fluctuations or
extreme maximum temperatures is prohibited
● they are used in household devices or devices belonging to categories 1
to 7 and 10 specified in Appendix IA of the Directive 2002/96/EC
("WEEE")
DOK-CONTRL-S67DIO8M12*-AP03-EN-P
Technical index
AC1
AB1
AB1
AC1
Operation modes
DI, DO, DIO
DIO and 1 counter
DIO and 2 counters