Misc. Topics; Setting The Timeout Value - GRASS VALLEY NV9000 User Manual

Chapter 7 provides the following:
Summary

Setting the Timeout Value . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Setting the Timeout Value
The NV9616 has panel options that use a timeout value. You can set the timeout value in
NV9000-SE Utilities. Choose the 'SysParams' table from the 'Tables' folder under the 'Views'
navigation pane. Click 'Add' and enter a timeout value as shown:
Fig. 7-1: SysParams Table (in NV9000-SE Utilities)
The name of the parameter must be exactly as you see it here. The timeout value
(expressed in seconds) must be a non-negative value. A suggested value is 120 seconds
(two minutes) or more. The default timeout value is 30 seconds.

The timeout value applies to all panels in your system controller's panel and router
network.
 If you do not add a timeout value to the 'SysParams' table, the timeout period will be
the default of 30 seconds.

Misc. Topics

63