GRASS VALLEY NV9000 User Manual page 35

Type Description
Source Means "the source is the master" and makes the source device the master.
Master Otherwise, the destination device is the master. This button (and these
concepts) apply only to machine control routes only.
The button definition has no fields to configure.
The button is a toggle: Press it once to make the source the master (it goes
high-tally); press it again to make the destination the master (the button is
low-tally).
A panel option allows you to make "source is master" the default. In this case,
the button still toggles between "source is master" and "destination is
master, " and the button, if present, is high-tally by default.
The 'Source is Master' button is also used to initiate "broadcast" machine
control routes. See
Source The button places the panel in source mode. Category selections in source
Mode mode select source devices. Category buttons that are not source categories
become disabled in source mode.
Categories that include both source and destinations appear in both source
mode and destination mode.
The button definition has no fields to configure.
Src/Dst The button toggles between source and destination modes. Category
Mode selections in source mode select source devices. Category selections in
destination mode select destination devices.
If you place this button on a panel, the panel does not need a 'Source Mode'
button or a 'Destination Mode' button.
The button definition has no fields to configure.
XY/MD The button toggles the panel between X-Y mode and multi-destination
Mode mode.
The button definition has no fields to configure.
Undefined This button type is a placeholder: during configuration, it makes the button
undefined and inactive. On the actual panel, the undefined button remains
unlit (dark).
Broadcast Routes on page
NV9608 and NV9616
User's Guide
44.
27