Local Salvos Submenu; Stop Record; Pause Record; Save Salvo - GRASS VALLEY NV9000 User Manual

Local Salvos Submenu

 Local salvos are not supported in NV915 system controllers. They are fully supported in
NV960 and NV920 system controllers.
Press the sixth menu button to display the local salvos submenu:
START START
RECORD RECORD
This submenu has two function buttons: 'Start Record' and 'Erase Local Salvo' .
To define a local salvo, you record a series of button presses at your panel. To do so, press
'Start Record' . The panel returns to normal mode, where you can carry out a series of tasks
that is to be the salvo.
When you have completed the series of tasks, press the menu button again, and then press
the 'Local Salvos' button again.
The local salvos submenu now has a different appearance:
START START
RECORD RECORD
The functions that are available now are:

• Stop Record

• Pause Record

The 'Exit' button returns to the main menu.
Stop Record
Press 'Stop Record' to terminate the recording of the salvo. You cannot save the salvo until
the recording is stopped.
Pause Record
Press 'Pause Record' to pause recording of the salvo, in anticipating of resuming the
recording later. After you press 'Pause Record' , the button changes to 'Resume Record' .

Save Salvo

Press 'Save Salvo' to name and save the salvo. When you press 'Save Salvo' , a salvo page
appears in which you may select an unused button (or a button that shows an existing local
salvo) to use for the salvo.
Setup Setup
PAUSE PAUSE SAVE SAVE CANCEL CANCEL
RECORD RECORD SALVO SALVO SALVO SALVO
• Save Salvo
• Cancel Salvo
MySVO1 MySVO1 MySVO2 MySVO2
NV9608 and NV9616
ERASE ERASE
LOCAL LOCAL
SALVO SALVO
ERASE ERASE
LOCAL LOCAL
SALVO SALVO
• Erase Local Salvo
User's Guide
EXIT EXIT
EXIT EXIT
51