Panel Options - GRASS VALLEY NV9000 User Manual

Configuration

Panel Options

Panel Options

The panel options section, at the right of the configuration page, has two parts: drop-down
menus and checkbox options. These are the drop-down menus:
These are its drop-down menu options:
Panel Type
Default Mode
Release Mode
Default
Destination
Preset Monitor
Status Monitor
18
XY/Multi- The panel configuration allows the operator to switch
destination between X-Y mode and multi-destination mode at any time.
Modes
XY only The panel configuration is restricted to X-Y mode.
Multi- The panel configuration is restricted to multi-destination
destination only mode.
X-Y Mode Starts the panel in X-Y mode after a reset.
Multi-Dest Starts the panel in multi-destination mode after a reset.
Mode
Normal Release This panel can release "locks" and "protects" set by the
designated user (at this panel or any other panel).
Force Release This panel can release locks and protects set by any user.
None After a reset, the panel displays no destination device. (This
is not recommended.)
‹device› The Panel uses the specified device as the destination after a
reset. (The 'Default State' button also returns the panel to
this destination.)
None The preset source video is not sent to a monitor.
‹device› The preset source video for the selected destination appears
on the specified monitor (device).
None The current source video is not sent to a monitor.
‹device› The current source video for the selected destination
appears on the specified monitor (device).
a