Table of Contents
Advertisement
Ultium Motion Hardware User Manual
Step 3
Connect the Receiver to the Ultium Sensor Charger
(873). This will charge the sensors.
•
Verify that the "charge" indicator on all
sensors glows amber (yellow).
•
Charge for approximately 3 hours or until
each sensor "charge" indicator turns off.
8.5 Cleaning the Ultium Motion Sensors
Safety precautions for cleaning the Ultium Motion Sensors:
For sanitary purposes, it is advisable to clean the back of the Ultium Motion Sensors on a regular basis.
The Ultium Motion Sensors can be cleaned with a cloth slightly dampened with a solution of mild soap
and water or disinfectant solution (i.e. isopropyl alcohol swabs or household disinfectant wipes).
The Ultium Motion Sensors are not warranted against exposure to any of the conventional forms of
sterilization (autoclave, heating, etc.). Users wishing to utilize this equipment in a sterile environment,
such as an operating theater, should consult Noraxon for other options.
• Only use a damp cloth with mild soap and water or isopropyl alcohol to clean the
back of the Ultium Motion Sensors
• DO NOT immerse Ultium Motion Sensors in any water or liquid.
CAUTION
(Rev B)
38
Advertisement
Table of Contents
