Table of Contents
Advertisement
Ultium Motion Hardware User Manual
5.5 Installing the Companion Software – myoRESEARCH™ 3
To utilize the full functionality of the Ultium Motion System, and ensure the system has updated drivers,
Noraxon's myoRESEARCH 3 needs to be installed on the computer.
Note: The Ultium Receiver requires the Noraxon USB device driver which is pre-installed by the MR3
software installation. It is also available in the
Companion Software Installation
The Ultium Motion System is compatible with Noraxon
MR3 software.
1. Insert the MR3 USB flash drive into the PC
2. A menu will automatically pop up
3. Click on the Noraxon installation file and follow the
Wizard's instructions
Companion Software Activation
The installed companion software must be activated before unrestricted use is possible.
1. Open MR3
2. A dialog box will indicate how many more times
MR3 can be opened
3. Click on "Activate"
4. Enter the License ID provided on your USB flash
drive and press "OK"
5. If you have an internet connection, click Activate by
Internet for immediate activation
6. Alternatively, email the provided activation ID to
activation@Noraxon.com
email or respond by phone with the Activation
Code. Enter the provided Activation Code to
remove any restrictions on use.
(Rev B)
Downloads Section
Noraxon Support will
of the Noraxon website.
16
Advertisement
Table of Contents
