Noraxon Ultium Motion Hardware User Manual page 26

Ultium Motion Hardware User Manual
Off – no correction applied to the myoMOTION model
Foot, shank – Magnetic correction applied to the foot
to shank joint angle to correct for heavy magnetic
interference
Foot, shank, thigh – Magnetic correction applied to
the foot-shank-thigh joint angles to provide additional
magnetic correction in the presence of heavy
magnetic interference.
Treadmill mode – Magnetic correction applied to the
entire model, correcting for magnetic interference (60
Hz) while performing gait analysis on the treadmill.
6.9.1 Functional Calibrations
6.9.2 Walking Calibration
6.9.3 Multi-Pose Calibration
6.9.4 Squat Calibration
(Rev B)
26