Creating A New Configuration - Noraxon Ultium Motion Hardware User Manual

Ultium Motion Hardware User Manual

6.5 Creating a New Configuration

Step 1
Within the Home screen click the
myoMOTION module icon.
Create a New Subject.
Note: Defining the height for the subject is
important since the software uses subject
height in its algorithm to compute bone
lengths and create an accurate avatar while
recording and later viewing a record
Select New Configuration.
Step 2
Insert the devices to be used for the
measurement into the configuration by
dragging a device in the list of Available
Devices to the Devices in your configuration
window.
Select the desired body segments to include
in the measurement configuration. Deselect
the body segments you do not wish to
include in the measurement.
Step 3
Select the desired measurement
configuration options. Each are described
below.
(Rev B)
22