Ultium Motion Hardware User Manual
8
Maintenance
Routine maintenance recommended for the Ultium Motion system involves cleaning the bottom
pads of the Ultium Motion Sensor periodically and zeroing the gyros daily. Because the Ultium
Motion sensor batteries are Li-Polymer, the only battery maintenance required is recharging.
8.1 Consumable Items
The consumable items listed here for use with your Ultium system are designed for one-time use. It is
suggested to regularly restock your supply to have available product when needed.
Part No.
Image
874E
874D
8.2 Replaceable Items
Part No.
BP10
610A
610D
610E
610S,M,L,X
610H,N,T
Note: The Ultium Motion battery packs cannot be replaced by the user. Only qualified Noraxon
technical personnel may perform maintenance.
(Rev B)
Description
Double-sided tape for attaching Ultium Motion
Sensors directly to the subject
Double-sided tape for attaching the torso adapter
directly to the subject
Image
Description
Replacement battery for Ultium Motion
sensors*
Sensor Body Segment Labels
Torso mounting strap specifically for sensors in
the Pelvis/Lower Thoracic
Shoe clip for sensors
Segment straps for holding sensors (small,
medium, large, X-large)
Hand straps for holding sensors (small,
medium, large)
36