Ultium Motion Hardware User Manual
Configuration Options
•
Sensors: Select the sensors you wish to use in the recording by checking the boxes.
•
Joint Angles: Select the anatomical joint angles you want to capture in the recording.
•
Advanced: Enable wobbling correction setting and select reference frame for acceleration data.
Sensor-based acceleration captures acceleration data with respect to the coordinate
o
frame printed on each individual sensor.
Earth-based acceleration data captures acceleration data with respect to the Earth
o
coordinate frame for all sensors.
•
Orientations: Select the Euler orientation angles you want to capture in the recording.
•
Bones: Set the bone measurements for the skeletal avatar. These are calculated based on the
height chosen for your subject or you can manually enter measured bone lengths for individual
segments.
•
Custom Angles: Create a user-defined angle based on the difference between two selected
sensors, including object sensors.
6.6 Initialize a Measurement
Continue to the next step by selecting Measure.
Active the hardware by selecting Activate or select a Functional Calibration if operating within a
distorted magnetic environment.
(Rev B)
23