Honda HRS216PKA Manual page 99

CAM PULLEY/CRANKSHAFT/PISTON/
CYLINDER BLOCK HRS216PKA • HRS216SKA • HRS216VKA
6. COMPONENT INSPECTION
CAM PULLEY HEIGHT INSPECTION
Standard Service limit
37.394 mm (1.4722 in) 37.369 mm (1.4712 in)
CAM PULLEY I.D. (BEARING) INSPECTION
Standard Service limit
10.027 mm (0.3948 in) 10.075 mm (0.3967 in)
CAM PULLEY DECOMPRESSOR INSPECTION
ARM
PIN
Inspect the decompressor return spring for proper strength.
Check the decompressor arm and pin for proper movement and
wear (P. 2-17).
SPRING
CAM PULLEY SHAFT O.D. INSPECTION
Standard Service limit
9.987 mm (0.3932 in) 9.920 mm (0.3906 in)
9-14