Honda HRS216PKA Manual page 119

HANDLE PIPE/CABLES
5. Remove the four 4 mm self-tapping screws and the
upper and lower clutch grips. Carefully remove the
multi-position adjuster and spring.
6. Remove the upper and lower bracket covers.
7. Remove the four 4 mm self-tapping screws and the
upper and lower grip brackets.
8. Remove the 5 x 37 mm roller pin.
9. Remove the cable from the lower grip bracket.
10. Put a protective pad around the upper handle pipe.
Tip the mower up and secure the upper handle pipe in a
bench vise.
11. Remove the belt cover and rear scroll
12. Push the transmission as shown and remove the Smart
Drive cable from the control arm.
13. Using pliers, pinch the Smart Drive cable locks, pull on
the cable, and remove it from the cable holder.
14. Remove the Smart Drive cable from the lawn mower.
10-14
HRS216PKA • HRS216SKA • HRS216VKA
UPPER BRACKET COVER
UPPER GRIP BRACKET
5 x 37 mm
ROLLER PIN
4 mm
SELF-
TAPPING
SCREW (8)
LOWER CLUTCH
GRIP
CABLE HOLDER
(P. 11-2).
UPPER CLUTCH GRIP
LOWER
BRACKET
COVER
CABLE LOCKS
SMART
DRIVE
CABLE
SPRING
MULTI-POSITION
ADJUSTER
LOWER
GRIP
BRACKET
TRANSMISSION
CONTROL ARM
Push