Honda HRS216PKA Manual page 72

HRS216PKA • HRS216SKA • HRS216VKA
19. Install the float valve, float, and float chamber. Make
sure the float chamber is installed correctly, making a
good seal with the gasket.
20. Reinstall the carburetor on the engine, turn the fuel
valve on, and check for fuel leaks.
21. Start the engine and allow it to warm up for several
minutes. Then check the maximum no load engine
speed (P. 3-17).
FLOAT LEVEL HEIGHT INSPECTION
Place the carburetor in the position as shown and
measure the distance between the float top and the
carburetor body when the float contacts the seat.
TOOL:
Float level gauge
FLOAT HEIGHT:
If the height is out of specification, replace the float
and/or the float valve. Recheck the float height.
07401-0010000
10.2 mm (0.40 in)

FLOAT LEVEL GAUGE
FUEL SYSTEM
7-13