Table of Contents
Advertisement
CAM PULLEY/CRANKSHAFT/PISTON/
CYLINDER BLOCK
2. OIL PAN/CRANKSHAFT/CYLINDER BLOCK
REMOVAL/INSTALLATION
Remove the cam pulley and rocker arm.
6 x 25 FLANGE BOLT (8)
12 N•m (9 ft-lb)
THRUST WASHER
P. 9-6
INSTALLATION:
CRANKSHAFT
P. 9-17
INSPECTION:
INSTALLATION:
Be careful not to
damage the oil seal.
After installation, clean
the crankshaft tapered
surface.
CONNECTING ROD BOLT (2)
12 N•m (9 ft-lb)
CONNECTING ROD CAP
P. 9-10
INSTALLATION:
9-4
(Apply grease to the lips.)
The timing gear
and crankshaft are
separate parts.
P. 9-17
HRS216PKA • HRS216SKA • HRS216VKA
28 x 41.25 x 6 mm OIL SEAL
INSTALLATION:
Be careful not to damage the lip of the oil
seal when installing the oil pan with the
oil seal.
OIL PAN ASSEMBLY
INSPECTION:
P. 9-5
REMOVAL:
ASSEMBLY:
8 x 20 mm DOWEL PIN (2)
TIMING BELT
INSTALLATION:
Check that the belt is not
worn or cracked and do
not bend or twist the belt.
PISTON ASSEMBLY
DISASSEMBLY/REASSEMBLY:
P. 9-15
INSPECTION:
INSTALLATION:
(Apply grease to the lips.)
25.4 x 62 x 6 mm OIL SEAL
P. 9-19
P. 9-6
P. 9-7
P. 9-5
CYLINDER BLOCK
P. 9-19
INSPECTION:
P. 9-4
ASSEMBLY:
Hide quick links:
Advertisement
Table of Contents
