Honda HRS216PKA Manual page 21

SERVICE INFORMATION
2. Confirm there is no tension in the Smart Drive
cable at the transmission control arm.
If tension exists, proceed to the SMART
DRIVE DISASSEMBLY AND INSPECTION
procedure on page
3. Inspect the transmission control arm return
spring. If the spring is broken, missing, or
damaged, replace it.
4. Push the control arm up to remove all the
slack from the belt. Inspect the clearance
between the outside of the belt and the belt
guides.
Belt Guide Clearance:
• Driven Pulley Belt Guide Clearance:
2 ~ 3 mm
• Drive Pulley Belt Guide Clearance:
3 ~ 4 mm
5. If the clearance is out of specification, adjust
or replace the belt and belt guide(s).
2-12
10-17.
HRS216PKA • HRS216SKA • HRS216VKA
Confirm there is no
tension in the Smart
Drive cable.
DRIVE PULLEY BELT GUIDE
CLEARANCE
3 ~ 4 mm (0.118 ~ 0.157 in)
BELT
DRIVE
PULLEY
BELT GUIDE
Inspect the
control arm
return spring.
DRIVEN PULLEY BELT GUIDE
CLEARANCE
2 ~ 3 mm (0.079 ~ 0.118 in)
DRIVEN
PULLEY
BELT
BELT GUIDE