About This Guide; Organisation - Loma X5c Operating Instructions Manual

2

About this guide

General
This guide explains how to use the X
required to operate the machine. This guide does not cover the advanced features of the
X X-Ray Inspection System. For more information on the advanced features please refer to
5c
the X Reference Guide.
5c
Audience
This guide is designed for the following users of the X
information on higher levels of access please see the X
 Operators:-
Operators use the machine functionality and features to carry out routine product
inspections and remove non-conforming products from the production line.
 Supervisor:-
Supervisors use the machine functionality and features to manage the selection and
inspection of a range of products.
Purpose
The goal is to show users how to carry out operations and tasks that will ensure the effective,
safe and continued operation of the machine enabling it to detect non-conforming
products and remove them from the production line.

Organisation

This guide is organised into the following chapters:
Introduction
Guidelines provide an introduction to this guide and some general information, including
global contact details for Loma Systems.
Safety First
Guidelines identify and explain the safety features built into the machine, potential hazards,
warnings, labelling and other general and legislative information related to the safe use of
the machine.
Getting Started
Guidelines describe the basic controls and how to switch on, log in and prepare the
machine for use.
Document Number: 814212-2.0-ENG
X-Ray Inspection System. It walks through the process
5c
X-Ray Inspection System. For
5c
5c
Reference Guide
Original Document
Introduction