Loma X5c Operating Instructions Manual page 60

56
To edit the Product Name
1. Tap Edit.
A keyboard is displayed.
2. Enter the new Product Name using the keyboard.
3. Tap OK.
4. The Product Name is updated.
 Number - Displays the unique number for the product.
To edit the Product Number
1. Tap in the Product Number field.
A numeric keypad is displayed.
2. Enter the new Product Number.
3. Tap OK.
4. The Product Number is updated.
 Barcode - Displays the product barcode if applicable.
To edit the Product Barcode
1. Tap in the Product Barcode field.
A keypad is displayed.
2. Enter the new Product Barcode.
The Product Barcode must be eight characters long and unique.
3. Tap OK.
4. The Product Barcode is updated.
 Size - This area displays the following pack size information for the currently running
product:
 Pack Length (mm) - Displays the product pack length. You can display a ruler
to help with gathering the Pack Length. For more information see Measure.
To adjust the Pack Length (mm)
1. Tap in the Pack Length (mm) field.
A numeric keypad is displayed.
2. Enter the new Pack Length (mm).
3. Tap OK.
4. The Pack Length (mm) is updated.
 Pack Threshold - The minimum greyscale value used to determine when a
new pack enters the X-Ray beam. This should usually be set to 220 which is
sufficient for most products.
To adjust the Pack Threshold value
1. Tap in the Pack Threshold field.
Document Number: 814212-2.0-ENG
Operating Instructions
Original Document