Loma X5c Operating Instructions Manual page 12

8 Safety First
Intended Use of the Machine
Loma X-Ray Inspection Systems are designed to be used in an industrial environment for
detecting contaminants and over/underweight products presented in packaging. Any
improper use could invalidate the EC Declaration of Conformity issued with the system and
also the system warranty. This section provides further details.
Noise Levels
Generally in an industrial environment some background noise is present due to the
operation of electrical equipment and mechanical movements of machinery such as
conveyors and electrical noise. In general operation, Loma X-Ray Inspection Systems do not
emit a level of noise that is hazardous.
End of Life Treatment
The Waste Electrical and Electronic Equipment recycling (WEEE) Regulations 2006 and the CE
Directive 2002/96/EC require that electrical and electronic equipment must be recycled at
the end of its useful life. This section provides some guidelines.
Emergency Procedures
This section lists the potential emergencies that may be encountered and the associated
procedures.
Quality Assurance
If your business is operating under an approved Quality Management System, all activities
covering the safe operation and maintenance of the X-Ray Inspection System will need to
be incorporated into the system to ensure continued compliance. This section provides some
guidelines on what needs to be considered.
End User Licence Agreement
This section contains details of the End User Licence Agreement for the system software.
Document Number: 814212-2.0-ENG Original Document