User Access - Loma X5c Operating Instructions Manual

Getting Started
Log Off
It is recommended that you change the Access Level to None once you have finished using
the machine to preclude misuse of the system by untrained/unauthorised staff.
After around 10 minutes, the machine will automatically reset the Access Level to None, but
to change it manually proceed as follows:
To log out of the system.
1. Tap In the
The GoTo screen is displayed.
2. Tap the Access Level button.
The Access Level (Users) screen is displayed.
3. Tap Log Off.
The Access Level will be set to None.
The Main Run

User Access

User access to the features and functionality of the Loma X
managed through a general access level and five password protected levels, listed and
described below, with each level providing access based on the user function.
During installation and commissioning, the Loma Engineer will set and provide you with
passwords for accessing all user levels which you can then provide to staff as required.
Named accounts may then be set up for each user, selecting a specific access level for
them, with a unique password for each user to log in to the system.
If you attempt to access a screen that is only available to user levels above your current
logged in level, you will be prompted to enter a valid password for the required user level.
This guide is aimed at the following user levels. For more information on user levels see the
relevant X Reference Guide which is available on the
5
 None - (Level 0)
This is the general access level used for selection when the system is not being used
but is left powered up. It provides no access to any features or functions.
 Operator - (Level 1)
This level of access is aimed at operators who need to use the machine functionality
and features to carry out routine product inspections to remove any contaminated
products from the production line.
It is recommended that you set the access level back to None once you have
completed your activities to prevent unauthorised access to features and
functionality.
Original Document
Main Run screen.
screen will be displayed and you will be logged off.
X-Ray Inspection System is
5c
Copyright © 2017 Loma Systems
29